Steam Tunnels for Shrink Sleeves

Steam Tunnels for Shrink Sleeves

Financing Available

The Steam Tunnels for Shrink Sleeves, which are electro-thermal steam generators are the power house of our shrink tunnel line. Suitable for all shapes bottles such as round and quadrated and all types of shrink films from PVC to PLA this steam shrink tunnel will quickly and efficiently take your bottle zero to hero. Conveyor is optional and additional. The price does not include the conveyor.



More Information

Tunnel Opening: 5 3/4″ x 12″ x 79″ (WxHxL)
Steam Tubes: 6 adjustable tubes in 3 sections of tunnel
Construction Material: Stainless Steel
Main Wall Power: 220V /3O/ 50/60Hz /30 Amps Max.
Electro-Thermal Power: 18 Kilo Watts
Steam Pressure: 3.62-5.80 PSI
Overall Machine Size: 22″ x 48″ x 80″ (WxHxL)
Machine Weight: 510 LB
Steam Consumption – 55lbs./hour
Conveyor Speed: 0 to 100 feet/min -not included in the price
SPC-1200 36KW Steam Generator – sold separately

This electro-thermal steam generator uses a copper high-pressure pump, to supply steam to the system. There are water inlet and pressure controls built into the system. It takes approximately 5 minutes to power-up the steam supply system by simply turning the water supply valve and turning the power switch to the “ON” position.


Designed to efficiently shrink full
body shrink sleeves on almost any
container type and shrink film

The low-pressure steam drum
distributes steam evenly with an
integrated steel tube design
There are steam jet tubes in each
section of the tunnel which are
adjustable for both height and
steam output.

The shell of the tunnel is constructed
of stainless steel and there is also
a stainless steel water collecting
plate to collect the condensed

The machine’s stainless steel,
water-proof design makes it easy to
clean and maintain.

Electrical Requirements:
Main Wall Power: 220V / 3O / 50/60 Hz / 30 Amps Max.
Electro-thermal Power: 18KW
Air Pressure: .025-.04 Mpa
Overall Machine Size: L 24” x W 22” x H 48”
Weight: 212 lbs.