APT-16-6-20 Our Most Economical Heat Tunnel
The APT-16-6-20 is our most economical heat tunnel. From reams of paper to CD’s/DVD’s and even jars, this economical heat shrink tunnel will get the job done. Perfect for PVC, PETG, OPS and POF film, this tunnel will help speed up any production line.
Features Include:
- Fully re-circulating air chamber
- 4 Direction air flow
- AC variable speed drive
- Automatic cool down
- Thermal overload protection on all motors
- Adjustable air velocity chromed live roller rod conveyor
- Solid state digital temperature control
- Sealed bearings on drive and idler shafts
Electrical Specs:
- Voltage AC 220V/1 Phase
- Power 5KW
- Max Current 20 Amps
- Tunnel Size (LxWxH) 20″x16″x6″
- Machine Size (LxWxH) 36″x25″x30″
For those of you filling your own beverage bottles and cans the SM-1230 or its big brother the SM-2535 are what you have been looking for. This heat tunnel will fill all your needs from shrink to clear full bottle sleeves to neck bands to full body printed shrink sleeves. This tunnel works great with PETG, PVC, OPS, and PLA shrink material.
Tunnel Dims & Electrical Specs:
SM-1230 Features:
- 71″ L variable speed conveyor (optional)
- rolling stand with locking casters (optional)
- air flow controls
- Inside Tunnel Dimensions (LxWxH) – 59″x6″x12″
- Electrical Outlet – 3 Phase/220 volt/40amp
SM-2535:
- 71″ L variable speed conveyor (optional)
- rolling stand with locking casters (optional)
- air flow controls
- Inside Tunnel Dimensions (LxWxH) – 59″x10″x14″
- Electrical Outlet – 3 Phase/220 volt/40amp
If you are looking to make your juice or water bottle tamper evident the SM-1540 Electric Heat Shrink Band Tunnel is what you need. This tunnel is designed specifically to for neck shrink bands on any type of bottle from water to juice and even to shrink the capsules on the top of your wine bottles. When being run at high temperature this tunnel will not effect your product in the bottle nor will it effect the shape of plastic bottle. This tunnel comes either as heat tunnel and conveyor comb or can also be purchased to fit over your existing conveyor production line.
Electrical Specs & Tunnel Measurements
- 59″ L variable speed conveyor
- locking casters and side guides on adjustable height stand
- Inside Tunnel Dimensions (LxWxH) – 39″x5″xAdj.
- Electrical Outlet – 3 Phase/220volt/40 Amp
- infeed or exit conveyor
- 4″ wide with side guide rails
SLC-2000H(L) & SPC-1200 (sold separately)
The SLC-2000H steam powered heat shrink tunnel is the power house of our shrink tunnel line. Suitable for all shapes bottles such as round and quadrated and all types of shrink films from PVC to PLA this steam tunnel will quickly and efficiently take your bottle zero to hero.
Tunnel Specs:
- Steam Consumption - 110lbs./hour
- Vapor Pressure - 1 Kg/cm2
- Inside Tunnel Dimensions 2000H (LxWxH) – 79″x4.33″x13″
- Inside Tunnel Dimensions 2000HL (LxWxH) – 79″x7″x13″
SPC-1200 36KW Steam Generator – sold separately
This electro-thermal steam generator uses a copper high pressure pump, to supply steam to the system. There are water inlet and pressure controls built into the system. It takes approximately 5 minutes to power-up the steam supply system by simply turning the water supply valve and turning the power switch to the “ON” position.
Electrical Requirements:
- Main Wall Power: 220V / 3O / 50/60 Hz / 30 Amps Max.
- Electro-thermal Power: 18KW
- Air Pressure: .025-.04 Mpa
- Overall Machine Size: L 24” x W 22” x H 48”
- Weight: 212 lbs.
